Cabletron Systems Access Server 316 Guia de Instalação descarregar pdf (Página 114)

Terminal and Personal Computer Problems

10-2

Port and Device Problems

Problem Action

Power

• Ensure that the device is plugged into an active outlet.

• Ensure that the power switch is on.

• If the device has a fuse, replace it.

• If the device has a circuit breaker, reset it.

Cables

• Ensure that the device cable is secure at both ends.

• If the cable is spliced, ensure that all junctions are secure.

• Verify all device cable connections at couplers, adapters, and

cable concentrators (harmonica).

• Inspect the cable for cuts and crimps. If necessary, use another

cable.

• Ensure that the maximum allowable cable length is not exceeded.

Refer to the access server hardware documentation.

Speed Match the access server port speed to that of the device. If Autobaud is

enabled, the port and device speed match automatically. If split-speed is set,

Autobaud must be disabled.

Parity and

character size

Match the access server port parity and the character size to that of the

device. The access server supports devices with odd, even, mark, space, and

no parity. It supports character sizes of 7 and 8 bits. If Autobaud is enabled,

parity and character size for the port and device match automatically.

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 301 302

Sem comentários

Cabletron Systems Access Server 316 Guia de Instalação Página 114