Cabletron Systems TRFOT-3 Guia de Configuração descarregar pdf (Página 23)

Setting Up the 6C105

6C105 Overview and Setup Guide 3-3

3.2.2 Installing the Cable Management Bar

To install the cable management bar, proceed as follows:

1. Remove the cable management bar from the shipping box. Ensure that

there are four screws inside the bag with the cable management bar.

2. Refer to Figure 3-1. Line up the two holes on each side of the cable

management bar with the two holes located underneath the 6C105,

near the front of the chassis.

3. Using a Phillips screwdriver securely fasten the 4 screws.

Figure 3-1 Installing the Cable Management Bar

Bottom of Chassis

Front Panel of Chassis

Screws (4)

2016_05

Cable Management Bar

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 37 38

Sem comentários

Cabletron Systems TRFOT-3 Guia de Configuração Página 23