
DHCP Configuration Examples
90 Enterasys Xpedition User Reference Manual
10. Specify a database update interval of every 15 minutes.
Configuring Secondary Subnets
In some network environments, multiple logical subnets can be imposed on a single
physical segment. These logical subnets are sometimes referred to as “secondary subnets”
or “secondary networks.” For these environments, the DHCP server may need to give out
addresses on different subnets. The DNS server, DNS domain, and WINS server may be
the same for clients on different secondary subnets, however, the default gateway will
most likely be different since it must be a router on the client’s local subnet.
The following example shows a simple configuration to support secondary subnets
10.1.x.x and 10.2.x.x.
1. Define the network parameters for ‘scope1’ with the default gateway 10.1.1.1.
2. Define the address pool for ‘scope1’.
3. Define the network parameters for ‘scope2’ with the default gateway 10.2.1.1.
4. Define the address pool for ‘scope2’.
5. Create a superscope ‘super1’ that includes ‘scope1’.
6. Include ‘scope2’ in the superscope ‘super1’.
Since there are multiple pools of IP addresses, the pool associated with ‘scope1’ is used
first since ‘scope1’ is applied to the interface before ‘scope2’. Clients that are given an
address from ‘scope1’ will also be given parameters from ‘scope1,’ which includes the
dhcp global set commit-interval 15
dhcp scope1 define parameters address-netmask 10.1.0.0/16 gateway 10.1.1.1 dns-domain
acme.com dns-server 10.1.44.55
dhcp scope1 define pool 10.1.1.10-10.1.1.20
dhcp scope2 define parameters address-netmask 10.2.0.0/16 gateway 10.2.1.1 dns-domain
acme.com dns-server 10.1.77.88
dhcp scope2 define pool 10.2.1.40-10.2.1.50
dhcp scope1 attach superscope super1
dhcp scope2 attach superscope super1
Comentários a estes Manuais