Cabletron Systems T2015 Guia de Instalação descarregar pdf (Página 169)

100

101

Chapter 9 Network Device Driver Options 159

AMD AM2100

Required entry:

• drivername = am2100$ or am2100n$

The following table summarizes the possible entries and values in the

[am2100] section of the LAN Manager PROTOCOL.INI file:

Entry Units Range Default

dmachannel integer 3, 5, 6, 7 5

drivername — — am2100$ or

am2100n$

interrupt integer 3, 4, 5, 9 9

ioaddress hex. 200–3E0 300

Entries in the [am2100] section of the LAN Manager PROTOCOL.INI

file have the following meanings:

dmachannel

Indicates the current DMA jumper configuration of the network

adapter. This entry is ignored when the adapter runs in shared-

memory mode.

drivername

Identifies the driver name of the network device driver. The

drivername is am2100$ for the first network adapter, am21002$ for

the second, and so on.

interrupt

Indicates the interrupt level of the network adapter.

ioaddress

Indicates the current I/O address jumper configuration of the network

adapter. The value you select on the adapter must equal this entry’s

value. If this entry does not match the adapter’s switch settings, the

driver reports an error.

1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 418 419

Comentários a estes Manuais

Sem comentários

Cabletron Systems T2015 Guia de Instalação Página 169

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Cabletron Systems T2015