Cabletron Systems T2015 Guia de Instalação descarregar pdf (Página 173)

100

101

Chapter 9 Network Device Driver Options 163

Cabletron E2112

Required entry:

• drivername = e21ndis$ or e21ndisn$

The following table summarizes the possible entries and values in the

[e21ndis] section of the LAN Manager PROTOCOL.INI file:

Entry Units Range Default

drivername — — e21ndis$ or

e21ndisn$

interrupt integer 3, 4, 5, 6, 7, 9, 10,

11, 12, 14, 15

ioaddress hex. 220, 280, 300,

380

media — pri, sec pri

sharedram hex. A0000–E0000 D0000

Entries in the [e21ndis] section of the LAN Manager PROTOCOL.INI

file have the following meanings:

drivername

Identifies the driver name of the network device driver. The

drivername consists of the base portion of the filename, plus a digit

when more than one adapter is installed. The drivername is e21ndis$

for the first adapter, e21ndis2$ for the second, and so on.

interrupt

Indicates the interrupt level of the network adapter.

ioaddress

Indicates the base I/O address for the network adapter. If this entry

does not match the adapter’s I/O address jumper settings, the driver

reports an error.

media

Specifies whether the network adapter is the primary (pri) or

secondary (sec) media.

sharedram

Specifies the physical RAM location on the network adapter if the

default location is not adequate.

1 2 ... 168 169 170 171 172 173 174 175 176 177 178 ... 418 419

Comentários a estes Manuais

Sem comentários

Cabletron Systems T2015 Guia de Instalação Página 173

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Cabletron Systems T2015