Cabletron Systems T2015 Guia de Instalação descarregar pdf (Página 248)

100

101

238 Installation Guide for Clients

PureData Arcnet Adapters

Required entry:

• drivername = msarc$ or msarcn$

This driver is for the following network adapters:

• PureData PDI508+

• PureData PDI516+

The following table summarizes the possible entries and values in the

[msarc] section of the LAN Manager PROTOCOL.INI file:

Entry Units Range Default

drivername — — msarc$ or

msarcn$

interrupt integer See explanation 2

iobase hex. See explanation 2E0

maxtransmits integer — 40

memorybase hex. See explanation —

Entries in the [msarc] section of the LAN Manager PROTOCOL.INI file

have the following meanings:

drivername

Identifies the device driver name. The driver name consists of the base

portion of the filename, plus a digit if more than one adapter is

installed. The drivername is msarc$ for the first adapter, msarc2$

for the second, and so on.

interrupt

Indicates the interrupt level of the network adapter. For the PDI508+,

the interrupt can be 2 or 7. For the PDI516+, the interrupt can be 2,

3, 4, 5, 6, 7, or 10. The default is 2.

iobase

Indicates the base I/O address for the network adapter. If this entry

does not match the adapter’s address jumper settings, the driver

reports an error. For the PDI508+, this value can be 2A0, 2E0, 2F0,

or 300. For the PDI516+, this value can be 220, 240, 250, 2A0, 2E0,

2F0, or 300. The default is 2E0.

maxtransmits

Indicates the number of transmits that can be queued by the driver.

1 2 ... 243 244 245 246 247 248 249 250 251 252 253 ... 418 419

Comentários a estes Manuais

Sem comentários

Cabletron Systems T2015 Guia de Instalação Página 248

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Cabletron Systems T2015