
Installing Your Access Point 3-5
Installing the AP into a Standalone Configuration
To connect to a 10BaseT Network –– Connect the 10BaseT cable to
the 10BaseT Ethernet connector, as shown in Figure 3-3.
Figure 3-3: Connecting to a 10BaseT Network
3 Connect the other end of the ThinWire cable or 10BaseT cable to an
active Ethernet outlet, such as a DECconnect faceplate or other
appropriate network device.
Step Action
1
2
R
o
a
m
A
b
o
u
t
LKG-8686-931-01
Access Point
Comentários a estes Manuais