Cabletron Systems RoamAbout Guia do Utilizador descarregar pdf (Página 36)

Installing the AP into a Standalone Configuration

3-6 Installing Your Access Point

4 Connect a 9-pin serial cable to the AP’s 9-pin, D-Sub, PC-compatible

serial port, as shown in Figure 3-4.

Note:

The pinouts for the AP’s local setup connector are listed in

Appendix A.

Figure 3-4: Connecting to the Setup Port

5 Connect the AP’s power supply cable to the power connector on the

back panel of the module, as shown in Figure 3-5.

Note:

The PC Card be inserted before applying power to the AP, as

described in Chapter 2. Do not try to insert or swap a PC Card in the

AP after connecting the AP’s power supply to an AC outlet.

Step Action

LKG-8804-931-01

Access Point

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 89 90

Sem comentários

Cabletron Systems RoamAbout Guia do Utilizador Página 36