Cabletron Systems RoamAbout Guia do Utilizador descarregar pdf (Página 63)

Configuring Your Access Point 4-19

Access Point Installation Menu

RoamAbout Access Point INSTALLATION MENU

[8] Set In-Band Interface IP Address

This option prompts you to enter the AP’s IP address subnet mask and default gateway.

If you want to perform SNMP management on the AP, you must assign it an IP

address. If there is a BootP/TFTP server on the network configured with the MAC

address of the AP, the AP will get an IP address from it.

The following example shows the dialog associated with this option.

============================================================================

IP ADDRESS CONFIGURATION

Format: The standard 4 octet dotted decimal notation in which

each octet of the address is represented as a decimal

value, separated by a ’.’ character.

example: 16.20.40.156

To delete the address, enter 0 in the appropriate address

field.

===========================================================================

IP address [16.20.40.156] :

Enter the Subnet Mask [255.0.0.0] :

Enter the Default Gateway [] :

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 89 90

Sem comentários

Cabletron Systems RoamAbout Guia do Utilizador Página 63